Posted by ditchwich66 on 04/04/16 - 8:38 AM
#1
I am looking for a little advice on seating placement for a new Super sport interior ordered form Specialty Marine for my 1964 13'.
I was bouncing around our web site this weekend and found a diagram posted, but was unable to print it and now I can't find it again.
I have ordered the "half" bench seat for storage of fuel tank to go under the seat and would like to install this properly forward to allow for the weight.
Has anybody installed this interior with a fuel tank and if so, how far forward to allow for balance.
Thanks.
Kevin
Edited by ditchwich66 on 04/04/16 - 10:52 AM
Posted by gabriletto69 on 04/08/16 - 2:35 AM
#2
I'm working as well on a 13' sport and will be nice to have this info also for me...nobody?
Posted by ditchwich66 on 04/08/16 - 10:25 AM
#4
gabriletto69 wrote:
I'm working as well on a 13' sport and will be nice to have this info also for me...nobody?
Posted by ditchwich66 on 04/08/16 - 10:30 AM
#5
I found 22" from splash well is stock. I plan on moving my helm up approx. 10" to adjust for weight off the stern. The exact measurement will be determined once I run my steering, and then I will set my helm last.
Let me know if I can help.
Kevin
Posted by jpaluseo on 04/08/16 - 11:59 AM
#6
I just did mine and used the same co. you you have the side wood pieces that hold the seat mine stopped when sliding them forward. I would say put the wood in and slide the all pieces towards the bow.... You will feel them lock in