---

From my latest count seven will be pleased with this topic and two will be suffering by just seeing this post..
As they used to say ion the old days "Nosce te ipsum "
Today brought some small issues by having to remove and replace deck screws from round to dome heads.
And this was done in order to give the console front deck area an even surface.
The round head ended up giving an unwanted tilting to the Igloo cooler to the deck surface.
The refinished mahogany shocks were fastened to perfectly fit the cooler's contours.
http://www.whalercentral.com/showuser...to_id=1901
Pre drilled and sealed with premium caulking #10 stainless Phillips were used.
A Cooler Tie Down Kit from Kennedy Products was used to neatly anchor the cooler to the shocks. www.kennedytiedow.com
http://www.whalercentral.com/showuser...to_id=1902
Never a dull moment here.
Thank You again for the good thoughts
Already thinking about the next one.