Posted by supersport75 on 09/06/15 - 4:37 PM
#6
With a vom and some spare wires I was able to trace those wires to the bow light. There is nothing for the stern.
Unfortunately I didn't realize that that 2 holes (coming in from the rail and inside the hull) are not aligned. The inside hole is much lower so I can't fish the wires back in at that angle. yes I could cut another hole inside the hull but I would only do that as a last resort.
I have a snake that I am fixing to try, but if anyone ran into this how did you fish the wires back in at that steep angle?