---

Hello Finnegan and Action, I only use the Soft Scrub for spot stain cleaning whether its the non-skid surface or a smooth hull area. The Soft Scrub is as abrasive as 3M's buffing compound when applied to gelcoat. After I treat a hull stain I immediately buff and wax to remove any inperfections and seal the gelcoat from oxidation.

Action when I use the cleaners with bleach to spot treat the affected vinyl I try to stay away from the stitching when possible and thoroughly rinse with fresh water. My boat cushions are white and sun-baked mustard stains (kids and sandwiches) are a bear to clear. Typically I will treat the stain, rinse, and allow some sun exposure to bleach-out the stain. If needed I will repeat the process.

Best,
Angel M.