Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Rubrail end caps/ stern light holder

Posted by whlr13 on 12/27/14 - 7:54 AM
#1

1987 outrage 18'
Any specs / recommendations to locate
Or fabricate marinium rub rail end caps or
Round tube guide that goes on teak
Starboard side of gunnel for stern
Light?
Whlr13

Posted by Joe Kriz on 12/28/14 - 4:13 PM
#2

I don't have any advice on finding the rub rail caps.

But I do have the upper stern light bracket you are looking for.
It has a new bushing but the wood needs to have rounded corners put on.
http://www.whalercentral.com/photogal...p;rstart=0

I can't finish the wood block because I no longer have the pattern.
If you need a photo of the small wood block, let me know.

Posted by whlr13 on 12/28/14 - 4:51 PM
#3

Many thanks Joe-
Nice New Years find
Virginia peanuts on the way
Let me know how much I owe u
And address for payment and
Peanuts
Probably best to respond to
Mail Address
Bob Olshan
11500 fairway dr #402
Reston va 20190
Whlr13

Posted by whlr13 on 12/28/14 - 4:53 PM
#4

And yes
A photo would help
Have friend with 22 outrage so
Can turn to him also for gunnel block
As well as one on deck

Posted by whlr13 on 02/03/15 - 4:55 AM
#5

As an FYI for any in need of rub rail
End caps
Having some made at fabrication shop
$45 each
Identical

Posted by krafft on 02/04/15 - 2:45 AM
#6

whlr13, do you have a picture of these end caps you are fabricating?

Brgds
Thor