Posted by Joe Kriz on 09/11/14 - 4:17 PM
#7
Option two: mount a new meaning used low hour 300HP
Sounds like option two is the cheapest and easiest.
Leave the transom stock and put on a 25 inch shaft single motor.
E-Tec 300hp = 528 pounds and 25 inch shaft
http://www.evinrude.com/en-us/engines...tec_300_v6
Yamaha F300 Offshore = 562 pounds and 25 inch shaft
http://yamahaoutboards.com/outboards/...ifications
Other motors of about the same config are all available new or slightly used.
Edited by Joe Kriz on 09/11/14 - 4:20 PM