Posted by Phil T on 09/14/19 - 10:02 AM
#8
V -
Before embarking on a re-wire, I would:
replace bulb
clean fixture contacts
Examine wire in stern to the battey.
Examine wire end fitting which connects to the switch. If possible, cut off and re-crimp new connector.
Clean (fine sandpaper) switch contacts.
Verify it is the bow light that is the culprit and not the all around light. Disconnect all-around light from switch and test bow light.
Any other permutations you can think of. Easier than rewire.
Aside- The story of how I found my first Outrage 17 is interesting. I found my 2nd and current Outrage 17, a bit farther south, outside Danville. VA