---

I will take more photo's after i finish digging out the remaining foam on the starboard side, cleanup some of the foam stuck to the fiberglass and probably get the hull back on the trailer. I also plan to measure and remove enough foam to install new wood under the deck where the consoles will be secured. As long as i have the deck open, might as well make sure i can secure the console to wood and not have screws into the nice dry interior.

I will wet sand all the flat areas, and gelcoat the repairs to the floor and make up a tube of gelcoat patch to fill all the little screw holes. The floor will still be a mess but the drive right now is to get a drier boat, put the interior back together so i can flip the hull, sand and respray the outside before winter.