---

In the last few days
I have been working on my Mahogany fish tub cover and my RPS wood surfaces.
Careful and detailed sanding removed all traces of stains,varnish and oxidation.
Two coats of Epoxy West System showed excellent sealing and shine.
A point to remember will be
1- To sand lightly between coats and erasing small protrusions.
2-To apply the Epoxy only while the surfaces are flat thus preventing the clear to run.
This will save you some extra sanding and touch ups.
I may apply some varnish later in order to give it a harder finish.
Brand suggestions?
I have been studying as to the proper part s to ad to the transom in order to be able to tow or to possibly lift the stern from two "eyes"
I am wondering as to what Perko or Whaler OEM parts may be available for this duty.