Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Engine mounting instructions

Posted by Mr T on 09/12/10 - 3:31 PM
#31

Tom W Clark wrote:
OK, your boat is in pieces.

If you are going to upgrade to power TnT then use a newer style unit that will not cover the drain holes.

Mount the motor two holes up and use a 13-1/4" x 15" Stiletto Advantage.

The old OMC aluminum 13" x 19" props are not the right props for your boat. Sell them on craigslist or Ebay.


+1 to this. I did this with my 69 nauset running a 1990 V4 evinrude 88, with the stiletto prop. Big improvemnt over the original setup running all the way down with an aluminum prop.