Posted by modenacart on 08/01/10 - 4:48 PM
#7
If it kicks in the gun all is not lost. Mine kicked in my gun and I just used a screw driver to knock it out. Gel coat doesn't like to stick to metal.
When you are board sanding to prep for spraying, be sure to use guide paint to find the high and low spots. You will be glad you did. I didn't use it the first time and my sides turned out so wavy I had to board sand again, this time using guide paint. I just sanded one of the sides with 220 grit and the difference is amazing. If you don't know how to use guide paint, look up board sanding on youtube.