Posted by seahorse on 07/27/10 - 9:14 PM
#7
This is what the connectors should look like under the dash. The 6 pin goes to the keyswitch, the 8 pin to the SystemCheck gauge and the 2 pin to the warning horn.
The loose connections with the white/tan wire are for the trim gauge. The other 3 are for a standard tach if you are using the 2" SystemCheck warning lite gauge
[IMG]http://i213.photobucket.com/albums/cc281/originalseahorse/WirningHarnessMWS.jpg[/IMG]