Posted by buckwheat on 03/16/09 - 1:42 PM
#1
I need to know what hardware to use for attaching the cushion to the z-legs. . and also the best hardware to use for mounting the zlegs to the boat. Any help is appreciated.
Posted by foghorn on 03/16/09 - 5:06 PM
#2
My plywood seat base was attached to the Z-legs using T-nuts. I could not find stainless T-nuts so I epoxied ordinary stainless nylock nuts into the ( new (I was making a new seat ) plywood. Drilled holes and then used a small chisel to make the 6 sides. Smeared with epoxy and hammered the nuts in. From the top, nylock side up. Attach using reg. machine screw or bolt from the bottom.
Foghorn