Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: What is this and where can i find one?

Posted by grahamh on 09/02/10 - 5:39 PM

My new (to me) Outrage is missing one of the stainless pieces of hardware inside the bow. It is square with two screws and a hole to mount something in the center. I assume they are used to mount a dodger??

where can i find a replacement?

if someone can tell me how to post a photo I can do that too.

thanks
Graham

Posted by Joe Kriz on 09/02/10 - 5:52 PM

Inside the bow is a large area.

Or do you mean inside the bow locker?

I have no idea.
Have you looked through the OEM Part Photos section on the left sidebar to see if you can identify it?

Posted by Joe Kriz on 09/02/10 - 5:56 PM

After re-reading your post...

So, there should be one of these pieces on each side and one is missing.
A Mills Dodger uses 4 fitting that attaches on the side of the bow just above the steps. 2 on each side.

Posted by grahamh on 09/03/10 - 3:04 AM

Joe-

Thanks for the response.

Yes, I have looked thru the OEm parts area and did not see this piece of hardware.

And yes, there should be 4 of them. So I assume they are for Mills covers.

Should I contact Mills for a replacement?

Anyone know how to attach a photo to a post?

thanks
Graham