RPS rod holder insert mod
|
Peter Chase |
Posted on 01/19/17 - 3:09 PM
|
Member
Personal Page
Posts: 16
Comments:
0
Joined: 01/10/17
|
First post to this great forum.
I have used "Plast-Dip" to coat the RPS rod holders on my 1984 Outrage 18'.
See attached pics, feel free to view my Personal Page for additional pics.
(Haven't figured out how to properly insert pics to a thread yet)
Edited by Peter Chase on 01/19/17 - 3:21 PM |
|
|
|
Joe Kriz |
Posted on 01/19/17 - 4:34 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11430
Comments:
452
Joined: 03/18/05
|
Peter,
The name of the photo cannot contain any spaces or characters.
The size must also be no larger than 125kb
Your photos look good in your personal page.
|
|
|
|
Phil T |
Posted on 01/20/17 - 5:10 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 6985
Comments:
6
Joined: 03/26/05
|
That is one pristine Outrage! Ouch!
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|
|
action |
Posted on 01/20/17 - 5:40 AM
|
Member
Personal Page
Posts: 208
Comments:
2
Joined: 01/03/15
|
Did you remove the rod holders to coat them? If so, how do they come out?
|
|
|
|
Peter Chase |
Posted on 01/20/17 - 1:44 PM
|
Member
Personal Page
Posts: 16
Comments:
0
Joined: 01/10/17
|
Phil T - Thanks for the comments on my Outrage. I am the third owner, have had it now for 2 months.
action - Short answer is yes I removed the RPS rod holders to coat them. I did a complete re-build so to speak on the RPS... new seat cushion from Specialty Marine and stripped the tired varnish off and refinished the teak with Amazon's Golden Teak Oil (5 coats), new stainless fasteners etc. Threw the whole tool box at that chore, but it was fun. The Plasti-Dip coating is easy to do and cheap. I put 3 coats on, but could have stopped at 2. I like the final result and recommend it.
|
|
|
|
Peter Chase |
Posted on 01/20/17 - 2:35 PM
|
Member
Personal Page
Posts: 16
Comments:
0
Joined: 01/10/17
|
One important thing I forgot to mention - I left the original inserts in place and coated over them.
Again, see my personal page for how everything came out. I like the black color.
|
|
|
|
Joe Kriz |
Posted on 01/20/17 - 3:23 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11430
Comments:
452
Joined: 03/18/05
|
The Rod Holder "LIP" is still available in Black color from Perko.
http://perko.com/catalog/fishing_equi...d_holders/
See our Parts Info and Photos section for information on many, many parts.
http://www.whalercentral.com/photogal...hoto_id=91
Edited by Joe Kriz on 01/20/17 - 3:26 PM |
|
|