Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I am about ready to install my new interior. Attempted to locate the wood in the floor for the console with a stud finder per the wood locating diagram on the site, but I am finding multiple pieces.
Converting interior from sport to super sport. Console will come out to the middle. Just need to make sure I hit wood when mounting the leg.
On a related note, what is recommended for filling the holes from the original foot? Three screw holes.
Lastly, for the mounting wood for battery, from the diagrams these are not going into wood. Is that a problem? I want to mount them on the centerline.
As for trying to locate the wood midship for the console that didn't go as well. Either I didn't mount my new interior far enough forward like original but the foot for the console only had one screw hit the wood. The other two are into the fiberglass. Shouldn't be a problem as I used 5200 in the holes and between the wood and deck.
