Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
The boat was completely disassembled and new floor put in......need to find out where the center console and seat should be attached as the old holes are not there!
I just happen to have a 1979 Montauk. If you look carefully at this photo, you can see that the front of the console mounts just where the floor begins to curve up and inward. My console is raised 6" on blocks, but the dimension is the same even if the console sits right on the floor.
The RPS seat is 18" back from the console. That is, the front face of the cushion to the aft console face. I recently just measured this dimension for someone else, so I know it's accurate.
