1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1980 13 Sport
JamesP	#1  Posted on 04/08/16 - 1:05 PM
Member Posts: 16 Comments: 0 Joined: 11/02/11	Hello Members, I just picked up a new to me 1981 13' Sport. I struggling to understand what the 5 screws are for on the transom. My 1985 didn't have them, but I do see them on other hulls. Can these be removed? are they standard edition for the 1980-81 years? Would appreciate any info. james P P.S. The picture is compliments of Neff. Not my hull, butt same situation. Edited by Joe Kriz on 04/08/16 - 1:24 PM
JamesP	#2  Posted on 04/08/16 - 1:16 PM
Member Posts: 16 Comments: 0 Joined: 11/02/11	picture won't load-sorry Edited by JamesP on 04/08/16 - 1:16 PM
TookyAndNatasha19	#3  Posted on 04/10/16 - 10:13 AM
Member Posts: 23 Comments: 1 Joined: 09/27/15	Hey James, I also live in Seattle. May be I can help.
MG56	#4  Posted on 04/11/16 - 4:39 AM
Member Personal Page Posts: 355 Comments: 0 Joined: 05/11/13	You might be talking about the mounting screws for a cable & pulley steering system >>> http://www.whalercentral.com/articles...icle_id=81 There are 5 screws on the starbrd side & 4 on the port, and you can remove them if they aren't being used.