1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1973 Outrage 19 "portholes"
Blackduck	#1  Posted on 04/20/15 - 12:57 PM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	Does anybody know what the "porthole" openings under the gunnels were trimmed with, if anything? Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
Finnegan	#2  Posted on 04/20/15 - 1:52 PM
Member Posts: 1926 Comments: 16 Joined: 05/02/08	Walter - they were trimmed with a vinyl edging guard, a cheap detail in my opinion. If I had one of these boats, I would square them off, and edge trim with rabbited teak, like the bottom edge of the gunwales are done. I am lucky that mine has the later exposed shelving design and no "ovals". http://smg.photobucket.com/user/lgolt...5830252497 A friend of mine just bought a beautiful fresh water speciman of one of these boats, and that is the recommendation I made to him.
sraab928	#3  Posted on 04/21/15 - 7:08 AM
Member Project Albums Posts: 1282 Comments: 13 Joined: 12/27/05	Here is what the factory used - although I am not sure on color - I had a special run of tan done for my restoration. http://img.photobucket.com/albums/v47...3_4641.jpg Scott 1974 21' Revenge w Mercury 200 ProXS V8
Blackduck	#4  Posted on 04/21/15 - 8:56 AM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	Is there any left, if so, can you give me the contact info? Also, how fast with the 140 Suzuki? is there any more of that red insert available? Edited by Blackduck on 04/21/15 - 11:19 AM Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
Finnegan	#5  Posted on 04/21/15 - 11:23 AM
Member Posts: 1926 Comments: 16 Joined: 05/02/08	For the red insert, contact Sue at Twin Cities.
Blackduck	#6  Posted on 04/21/15 - 1:26 PM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	Thank you Larry, I will-Walter Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
sraab928	#7  Posted on 04/21/15 - 1:46 PM
Member Project Albums Posts: 1282 Comments: 13 Joined: 12/27/05	Performance with the 140 was good. I remember low 40's but its been a couple years. Yes Sue at Twin Cities for the red like Larry said. As for the trim I am not sure how much I have left - how much do you need? Scott 1974 21' Revenge w Mercury 200 ProXS V8
Blackduck	#8  Posted on 04/21/15 - 1:48 PM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	Enough to do all of the openings on a 1973-19 (changed abbreviated year to full 4 digit year for clarification) Edited by Joe Kriz on 04/21/15 - 3:54 PM Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
sraab928	#9  Posted on 04/21/15 - 3:53 PM
Member Project Albums Posts: 1282 Comments: 13 Joined: 12/27/05	Ok - I don't own mine anymore - You will have to measure the openings and let me know the total. Scott 1974 21' Revenge w Mercury 200 ProXS V8
Blackduck	#10  Posted on 04/21/15 - 4:40 PM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	I will measure the openings tomorrow and give you the footage I will need. Thanks for your help-Walter Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
Blackduck	#11  Posted on 04/27/15 - 7:52 AM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	sraab928 wrote: Ok - I don't own mine anymore - You will have to measure the openings and let me know the total. I need about 40 feet-Walter Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
sraab928	#12  Posted on 04/27/15 - 1:15 PM
Member Project Albums Posts: 1282 Comments: 13 Joined: 12/27/05	Got your email Walter - I will measure up what I have and get back to you. Scott 1974 21' Revenge w Mercury 200 ProXS V8