1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Rubrail end caps/ stern light holder
whlr13	#1  Posted on 12/27/14 - 7:54 AM
Member Posts: 25 Comments: 1 Joined: 12/23/08	1987 outrage 18' Any specs / recommendations to locate Or fabricate marinium rub rail end caps or Round tube guide that goes on teak Starboard side of gunnel for stern Light? Whlr13
Joe Kriz	#2  Posted on 12/28/14 - 4:13 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11429 Comments: 452 Joined: 03/18/05	I don't have any advice on finding the rub rail caps. But I do have the upper stern light bracket you are looking for. It has a new bushing but the wood needs to have rounded corners put on. http://www.whalercentral.com/photogal...p;rstart=0 I can't finish the wood block because I no longer have the pattern. If you need a photo of the small wood block, let me know.
whlr13	#3  Posted on 12/28/14 - 4:51 PM
Member Posts: 25 Comments: 1 Joined: 12/23/08	Many thanks Joe- Nice New Years find Virginia peanuts on the way Let me know how much I owe u And address for payment and Peanuts Probably best to respond to Mail Address Bob Olshan 11500 fairway dr #402 Reston va 20190 Whlr13
whlr13	#4  Posted on 12/28/14 - 4:53 PM
Member Posts: 25 Comments: 1 Joined: 12/23/08	And yes A photo would help Have friend with 22 outrage so Can turn to him also for gunnel block As well as one on deck
whlr13	#5  Posted on 02/03/15 - 4:55 AM
Member Posts: 25 Comments: 1 Joined: 12/23/08	As an FYI for any in need of rub rail End caps Having some made at fabrication shop $45 each Identical
krafft	#6  Posted on 02/04/15 - 2:45 AM
Member Personal Page Project Albums Posts: 31 Comments: 8 Joined: 10/12/09	whlr13, do you have a picture of these end caps you are fabricating? Brgds Thor Krafft 1977 Outrage 19' w/ Yamaha Vmax 250