1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

2006 180 Ventura
Dougie03	#1  Posted on 06/30/14 - 5:15 PM
Member Posts: 1 Comments: 0 Joined: 06/30/14	I just got this boat this weekend and trying to figure out where to mount the new dragonfly transducer and where to attach bow chock for an anchor line. Could use some advise. [Corrected model name] Edited by Phil T on 07/01/14 - 6:06 AM
Phil T	#2  Posted on 07/01/14 - 6:07 AM
Administrator Personal Page Personal Album Project Albums Posts: 6985 Comments: 6 Joined: 03/26/05	Review the transducer manufacturer's instructions. You want to install it on the starboard side (right side when looking forward) of the transom.
jmburock	#3  Posted on 07/01/14 - 6:47 PM
Member Posts: 1 Comments: 0 Joined: 06/03/07	The bow cleats are so close to the gunwales that a chock isn't really necessary. I anchor to one of the bow cleats for temporary anchoring and use both cleats for my permanent mooring ball. Transducer should be on the starboard side, as low as possible but away from the prop wash. 2003 Boston Whaler Ventura 180