1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1978 Outrage V20 cooler chocks
Scottdgroth	#1  Posted on 04/24/14 - 9:26 PM
Member Posts: 3 Comments: 0 Joined: 04/21/14	Hello, I recently bought a 1978 v20 that was missing the front cooler chocks, cooler and cushions. I just ordered the parts from specialty marine, but am already thinking about how the install will go. Is it pretty safe to drill into the deck at the width these chocks are recomended for (using a 94 quart igloo)? Are there any good tips, photos or drawings anyone can point me to? Thanks in advance, Scott
Joe Kriz	#2  Posted on 04/24/14 - 11:11 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11430 Comments: 452 Joined: 03/18/05	Take a look through the members personal pages. http://www.whalercentral.com/viewpage...page_id=65 Scroll down to the 20' models and then the years, 1977-1986 Here is one: http://www.whalercentral.com/infusion...r_id=16726 1977 through early 1986 are the same hulls with the removable bow steps. http://www.whalercentral.com/userphot...album_id=9 The cleats should look like this or similar: http://www.whalercentral.com/photogal...hoto_id=40 Edited by Joe Kriz on 04/24/14 - 11:14 PM
Scottdgroth	#3  Posted on 04/25/14 - 8:36 PM
Member Posts: 3 Comments: 0 Joined: 04/21/14	Thanks Joe, that helps, i figure if they line up with the old screw holes I should be safe! Hopefully this all makes sense when i get them in hand. Scott