1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

2003 Montauk 170 console
petro29	#1  Posted on 04/22/14 - 7:13 PM
Member Posts: 35 Comments: 0 Joined: 04/18/09	I am looking for the dimensions of the console that came in the 2003 Montauk 170 models. I was hoping some one out there has them, or would be willing to measure thiers for me. I spoke with Sue at Twin Cities Marine She sent me pictures, but does not have dimensions. I am thinking about putting this console into my 1984 20' outrage. The current OEM console just doesnt fit my needs. Any input would be great. The console is still available complete from Whaler. Thanks
Finnegan	#2  Posted on 04/22/14 - 8:51 PM
Member Posts: 1925 Comments: 16 Joined: 05/02/08	Unless a person is 5'0" tall, the first console used on the 170 Montauks was ridicualously low, and uncomfortable to use when standing becasue of the low height of the wheel and engine control. As far as I'm concerned, it made the new Montauk a boat for kids. When I first saw how short it was, I was amazed that Whaler would have made such a mistake. Beginning with the 2007 model year boats, they designed a new, taller console for the boat. So to answer your question, I would not even consider a 2003 Montauk console for a boat as large as an Outrage 20. It will look silly in the boat, and give you poor control of the boat in my opinion. I also think those consoles were designed to fit a special raised area in the boat floor. It may not work on a flat floor surface.
petro29	#3  Posted on 04/23/14 - 7:54 PM
Member Posts: 35 Comments: 0 Joined: 04/18/09	The current console is the same console that was put in the early 17' Montauks, its way to small for my outrage , it would be a better fit in my 1968 Currituck. My issue is not only with the size but layout, impossible to read gauge cluster etc..thanks for the input
Joe Kriz	#4  Posted on 04/23/14 - 11:32 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11429 Comments: 452 Joined: 03/18/05	petro29 wrote: The current console is the same console that was put in the early 17' Montauks Not sure what console you have then. 1973-1776 1977-1982 1983-1985 (you say you have this one from 1984) 1986-1990 or something else? See the console years here and let us know exactly which console you have. http://www.whalercentral.com/articles...icle_id=58 The console from a 2003 Montauk 170 is not going to be any larger then what you have now. See these photos: http://www.whalercentral.com/infusion...r_id=26617 Here are the dimensions of the console you have now. http://www.whalercentral.com/articles...cle_id=107
petro29	#5  Posted on 04/24/14 - 3:18 PM
Member Posts: 35 Comments: 0 Joined: 04/18/09	Joe, Thanks for the info, I do indeed have the 1983 -1985 version. Its not the size , it really the layout and helm position. I use the boat only for fishing so a bigger is better approach is not for me. It comes down to ergonomics as well as fit. Thank you again for the links and information. Its an idea I have and was curious as to what other members have done or thought