1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Transducer mount location
Flarsen49	#1  Posted on 08/20/13 - 2:37 PM
Member Posts: 1 Comments: 0 Joined: 01/18/13	Where is the best place to install a fishfinder transducer on a 190 Montauk? I have a Merc 115hp with a clockwise rotating prop.
BSG	#2  Posted on 08/20/13 - 3:27 PM
Member Personal Page Posts: 36 Comments: 0 Joined: 06/23/13	Most electronics manufactures will have a recommendation on location, port or starboard but most of the time in the calmest area of the least turbulence.
jbg7777	#3  Posted on 07/26/16 - 7:13 PM
Member Posts: 1 Comments: 0 Joined: 07/29/11	Does anyone have a picture? I recently purchased an Elite 7Ti and don't want any issues. I will be mounting directly to transom of Montauk170 as I'm replacing another unit. Edited by jbg7777 on 07/27/16 - 7:04 AM
gchuba	#4  Posted on 07/27/16 - 7:16 AM
Member Posts: 1675 Comments: 0 Joined: 03/31/13	Add an email to your profile and I can forward some pictures of the mounting on my other boat. Basically on the downwards side of the motor's propeller rotation (starboard with conventional) with 1/3 below the bottom (+-)of the boat, slight angle to center of boat, as parallel with water as possible without submerging it too deep past the boats bottom. Garris Edited by gchuba on 07/27/16 - 7:46 AM